Our Company Contact   
AAC wall, roof, floor panels
SILKA | Calcium Silicate Elements/BlocksYTONG | AAC partition wall panels/blocksHEBEL | AAC wall, roof, floor panelsFERMACELL | Dry Lining

HEBEL panel thermal insulation

The autoclaved cellular concrete is made up of sand, water and air. Air filled cells form during the manufacturing process. This air, constitutes the best imaginable thermal insulation in this manufacturing context. As a result, Hebel cellular concrete takes on the characteristics of an insulating material.

Cellular concrete is an insulant in itself, so it is unnecessary to provide additional insulation. No more problems generated by poor insulation installation, no more thermal bridges. Building with Hebel always results in 100% efficient, durable insulation.

Coefficient of thermal conductivity
Coefficient λui: This coefficient is used for materials that are protected against the penetration of rain or moisture, such as, for example, internal or external walls protected by a finishing layer or watertight covering (cladding)
.
Coefficient λue: This coefficient is applied for materials that can be wet by rain or other sources of moisture.

Cladding Panels


The calculation of U values is based on the λUi values stated above.

Roof Panels


The roof insulation value will depend on the density of the cellular concrete, the slab thickness and any additional insulation. To increase the roof insulation value, it is in general more economical to increase the thickness of the cellular concrete than to fit additional insulation.

Floor Panels


The measured #Ui values are used for the calculation of U values.





© Xella International GmbH  |  Legal Notification  |  Imprint  |  Sitemap  |  Contact  |  Last Update: 05-07-2008